Please Click Picture |
Member# img/chopper.jpg |
Bobby Young
1968 Harley Sportster.
It has a rigid frame,
14
over springer, 58 degree rake, and the downtubes extended 8 inches.
The
engine is an 883 cc, bored, 10.5:1 compression, 1000 cc heads, P-cams,
solids, tubular push rods, a Joe Hunt mag, Lake injector, White's
equal
length headers, accel wires, and Raja clips. A lot of the parts were
made
in a machine shop, I.e.: the forks, pegs, shifter, etc.. It has 21
coats
of
tangerine "hot lacquer" and then a polyurethane clear coat. The pin
striping is yellow. A hand drawn Harley emblem from "gold leaf" was
put on
the tank before the clear coat.
|
